March 2008

March 1, 2008

ESL at the inflection point

Electronic system level (ESL) design is moving to a new stage in its development, advancing from a proof-of-concept environment to one that is seeing its adoption and deployment at the forefront of design. The article terms this shift ‘ESL 2.0’. The reason for this goes beyond mere marketing hype. Inherent in the transition defined above […]

Article  |  Tags:
March 1, 2008

Efficient packet header parsing using an embedded configurable packet engine

Cswitch’s CS90 Configurable Switch Array device has an interconnect structure, the dataCrossconnect network, that delivers bandwidth at 40- 100Gbps for packet-based applications. For packet handling tasks, the chip includes embedded configurable blocks, Configurable Packet Engines, that support functions such as frame parsing, CRC and hashing, and fast address look-ups, all at up to 1GHz. For […]

Article  |  Tags:
March 1, 2008

Active power management for configurable processors

ARC International is one of the largest suppliers of configurable processor technology. It licenses patented configurable multimedia subsystems and CPU/DSP processors that are used to design differentiated products. They are optimized for use in systemson- chip (SoCs) that consume less power, are less expensive to produce and require protection from cloning. The ARC Energy PRO […]

Article  |  Tags:
March 1, 2008

A question of freedom

Although no EDA company counts among its membership (for good practical reasons), it is fair to describe the US Consumer Electronics Association (CEA) as one of technology’s most broadly representative trade bodies. From retailers and brand holders to the hardware and software companies that directly supply components for CE products, the CEA has a position […]

Article  |  Tags:   |  Organizations:
March 1, 2008

Towards an infrastructure for profitable DFM

The real objective of design for manufacturability (DFM) is to improve a product’s profitability and manufacturing predictability for its market window and unit volume by optimizing tradeoffs between design costs and manufacturing improvements according to a holistic, lifetime view of the product. Current DFM practice often falls far short of that goal. For instance, the […]

Article  |  Tags:
March 1, 2008

To pause and take stock

The headline number in the Consumer Electronics Association’s (CEA) latest market forecast contained a few devils in the detail, although the sector does seem poised to defy more pessimistic views of the economy’s prospects. The projection of 6.1% growth for 2008 is robust, giving just over $171bn in US factory door sales (Figure 1).Meanwhile, GDP […]

Article  |  Tags: ,   |  Organizations:
March 1, 2008

The veteran competitor

In his early days in the semiconductor industry, Morris Chang Morris Chang was one of the “non-Texans” to Texas Instruments and was a manager struggling with the question of how to get individual transistor yields to somewhere around three or even four per cent. One of his colleagues – another immigrant to the Lone Star […]

Article  |  Tags: ,   |  Organizations: ,
March 1, 2008

The European view

This year’s general chair of Design Automation and Test in Europe is Donatella Sciuto, a full professor at the Politecnico d iMilano in Milan, Italy. She received her Laurea in Electronic Engineering from the Politecnico di Milano in 1984 and her PhD in Electrical and Computer Engineering in 1988 from the University of Colorado, Boulder. […]

Article  |  Tags: ,
March 1, 2008

Parasitics: an old problem reaches new heights

The semiconductor industry faces increasing challenges in the design of complex systems-on-chip, and while some have sprung from new, only recently anticipated sources, others are, in fact, very familiar. Foremost among these are the interconnect delays caused by the increasing influence of parasitic networks. Parasitic inductance is also a growing concern. The causes of parasitic […]

Article  |  Tags:
March 1, 2008

How VHDL designers can exploit SystemVerilog

SystemVerilog, the standard that originated from Accellera and is now IEEE1800, is not just for Verilog users. VHDL users can also improve their design processes using its proven verification features. Anyone involved in systemon- chip (SoC) design may face a mixed-language environment and will appreciate being able to leverage SystemVerilog with the VHDL portions of […]

Article  |  Tags: , ,

PLATINUM SPONSORS

Synopsys Cadence Design Systems Siemens EDA
View All Sponsors