Design Management

October 5, 2018
Gate-level simulation feature

How to improve throughput for gate-level simulation

Innovative methodologies, strategies and tool features help overcome other inefficiencies in complex but necessary simulations.
Article  |  Topics: EDA - Verification  |  Tags: , , , ,   |  Organizations:
July 23, 2018
Ashish Darbari is CEO of formal verification consultancy Axiomise.

The budget case for formal verification

Doc Formal sets out the 10 cost points in verification that formal will help you control and reduce.
Expert Insight  |  Topics: EDA - Verification  |  Tags: , , , ,   |  Organizations:
March 23, 2018
Ashish Darbari is CEO of formal verification consultancy Axiomise.

Doc Formal: My 10 golden rules

Ashish Darbari sets out the fundamental qualities of a successful formal verification project.
Expert Insight  |  Topics: EDA Topics, EDA - Verification  |  Tags: , ,   |  Organizations:
March 9, 2018
Saunder Peng is a Senior Application Engineer with Mentor, a Siemens Business. He received his B.S degree in Electrical Engineering from the University of California at Los Angeles, and his M.S. in Electrical Engineering from Columbia University, New York.

A better way to merge design files for physical verification

Still using custom layout or place and route tools here? Ditch that time-consuming practice for a real database merge flow.
December 5, 2017
Ashish Darbari is CEO of formal verification consultancy Axiomise.

Doc Formal: the crisis of confidence facing verification III

Ashish Darbari concludes his series on the need for new verification strategies by considering Debug and Signoff & Review.
Expert Insight  |  Topics: EDA - Verification  |  Tags: , , , , , , ,   |  Organizations:
October 31, 2017
Ashish Darbari is CEO of formal verification consultancy Axiomise.

Doc Formal: The crisis of confidence facing verification

Why is verification still such a challenge in spite of all the technologies and techniques being brought to bear
February 11, 2016

Where tools end and best practices begin

Learn how you can benchmark your design practices against the most successful players in the PCB market - and why you should.
October 21, 2015

FPGA-based prototyping 3: Which board do I need?

Part three of our series looks at the choices you face as you decide whether to build or buy a board.
September 28, 2015

FPGA-based prototyping 2: Understand the real cost

Part two of our series on FPGA-based prototyping looks at two critical factors to address before a project begins: budgeting and high-level implementation.
September 7, 2015

FPGA-based prototyping 1: What’s all this buzz about?

This multi-part series addresses various aspects of FPGA-based prototyping. Future installments will address budgeting and implementation, but we start by looking at why the technique is generating so much interest.

PLATINUM SPONSORS

Synopsys Cadence Design Systems Mentor - A Siemens Business
View All Sponsors